Application of extended distinct element method with lattice model to collapse analysis of RC bridges     

Limin Sun  Cen Zhou  Dong Qin  Lichu Fan 《地震工程与结构动力学》2003,32(8):1217-1236

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

System identification of linear structures based on Hilbert–Huang spectral analysis. Part 2: Complex modes     

Jann N. Yang  Ying Lei  Shuwen Pan  Norden Huang 《地震工程与结构动力学》2003,32(10):1533-1554

A method, based on the Hilbert–Huang spectral analysis, has been proposed by the authors to identify linear structures in which normal modes exist (i.e., real eigenvalues and eigenvectors). Frequently, all the eigenvalues and eigenvectors of linear structures are complex. In this paper, the method is extended further to identify general linear structures with complex modes using the free vibration response data polluted by noise. Measured response signals are first decomposed into modal responses using the method of Empirical Mode Decomposition with intermittency criteria. Each modal response contains the contribution of a complex conjugate pair of modes with a unique frequency and a damping ratio. Then, each modal response is decomposed in the frequency–time domain to yield instantaneous phase angle and amplitude using the Hilbert transform. Based on a single measurement of the impulse response time history at one appropriate location, the complex eigenvalues of the linear structure can be identified using a simple analysis procedure. When the response time histories are measured at all locations, the proposed methodology is capable of identifying the complex mode shapes as well as the mass, damping and stiffness matrices of the structure. The effectiveness and accuracy of the method presented are illustrated through numerical simulations. It is demonstrated that dynamic characteristics of linear structures with complex modes can be identified effectively using the proposed method. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

压裂井经济分析的优化方法   总被引：1，自引：0，他引：1  

计有权  杨天行  聂晶  纪昆 《吉林大学学报(地球科学版)》2003,33(3):312-314

水力压裂是油气井增产的一项重要技术措施。压裂效果的经济评价，实际上是一个压裂设计的优化过程。研究经济问题即为研究压裂优化问题。提出了压裂井的施工费用计算方法和贴现率、净收入、净现值的计算公式，并对压裂井进行了经济分析，给出了压裂设计优化的步骤。建立了八屋—后五家户气田压裂经济评价模型，并应用到实际施工现场。使油气单井产量比过去增加2～3倍。  相似文献   

大同市区二十年地下水动态研究   总被引：3，自引：0，他引：3  

范建明 《地下水》2003,25(2):95-97

本文首先分析了大同市地下水开采与地下水降深之间的对应关系，同时分析了影响地下水动态的其它因素，然后将地下水开采和大气降水量这两个影响地下水动态的主要因素与地下水动态进行复相关计算，求出相关方程，并进行不同开采量的地下水降深预测，最后根据这些地下水动态研究结果提出了解决大同市水问题几项对策建议。本文的研究结果同时表明，地下水动态研究非常必要且现实意义明显。通过动态变化可以了解地下水的补排及储水介质的变化情况，利用动态变化规律可以预测水文地质条件的变化趋势，根据地下水动态变化特点可采取有针对性的、灵活的取水方案。可以说，地下水动态研究成果在水资源的开发、利用、保护中具有极大的可利用价值。  相似文献   

济阳坳陷稀土元素特征及其在物源对比中的应用   总被引：6，自引：1，他引：6  

陈庆春  吴智平李伟 《地质论评》2003,49(6):622-629

物源是控制沉积物中REE组成最主要的因素，济阳坳陷区岩石稀土元素特征表明：①济阳坳陷古生界与华北地台其他地区同时代地层岩石的REE分布特征具有极大的相似性，这体现了晚古生代济阳坳陷区所处的整个华北地台区为一稳定的克拉通沉积盆地，地层横向分布稳定，具有一致的物源和构造背景；②济阳坳陷古生界为中生界的物源，反映了济阳坳陷区由古生代稳定地台型沉积到中生代山间盆地沉积的转变，中生代洼陷区的沉积主要来自对附近凸起区古生代地层的剥蚀；③新生界样品与中生界样品的REE分布模式具有很大的相似性，从一个侧面反映了济阳坳陷中生代与新生代的构造格局的转变，中生代接受沉积的部分洼陷区至古近纪成为供给物源的凸起区。  相似文献   

The role of sediment specific gravity and availability on cluster evolution     

A. N. Papanicolaou  K. Strom  A. Schuyler  N. Talebbeydokhti 《地球表面变化过程与地形》2003,28(1):69-86

The objective of this experimental study was to account for the role of sediment availability and specific gravity on cluster formation and cluster geometric characteristics (spacing and size). To isolate the effects of sediment availability and specific gravity on cluster evolution, mono‐sized spheres were used to simulate the cluster evolutionary cycle. Overall, twelve experimental runs were carried out in the laboratory flume. Six of these tests were performed by using glass spheres (specific gravity, SG = 2·58) and the other six by employing an equal combination of glass and Teflon spheres (SG = 2·12) of the same diameter to evaluate the role of specific gravity on cluster evolution. The three sediment availability conditions that were investigated here simulated isolated gravel elements, pool–riffle sequences and densely packed gravel‐bed. An advanced image analysis technique was employed to track the evolution of cluster microforms and provide quantitative information about the size and shape of clusters and the number of clusters per unit area. The results of this study showed that: (1) sediment availability affects the architecture and size of cluster microforms; and (2) clusters consisting of mono‐sized sediments start disintegrating at twice the incipient conditions. By performing complementary tests for the isolated gravel elements case, it was found that the evolutionary cycle of individual clusters could be described as follows, in order of increasing stress: no cluster→two particle cluster→comet→triangle→rhomboid→break up. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Hydrologic and geomorphic effects of temporary ice‐dammed lake formation during jökulhlaups     

Matthew J. Roberts  Fiona S. Tweed  Andrew J. Russell   skar Knudsen  Timothy D. Harris 《地球表面变化过程与地形》2003,28(7):723-737

  相似文献   

Mechanisms of riverbank failure along the Arno River,central Italy     

Stefano Dapporto  Massimo Rinaldi  Nicola Casagli  Pietro Vannocci 《地球表面变化过程与地形》2003,28(12):1303-1323

Riverbanks along the Arno River have been investigated with the aims of de?ning the main mechanisms of failure and retreat, their spatial distribution, and their causes. Geomorphological aspects were investigated by a reconnaissance of riverbank processes, for a number (26) of representative sites. Laboratory and in situ tests were then performed on a selected number of riverbanks (15). Based on the material characteristics, six main typologies of riverbanks have been de?ned, with homogeneous ?ne‐grained and composite banks representing the most frequent types. Slab‐type failures are the most frequent mechanism observed on ?ne‐grained banks, while cantilever failures prevail on composite banks. The role of river stage and related pore water pressure distributions in triggering the main observed mechanisms of failure has been investigated using two different types of stability analysis. The ?rst was conducted for 15 riverbanks, using the limit equilibrium method and considering simpli?ed hypotheses for pore water pressure distribution (annulment of negative pore pressures in the portion of the bank between low water stage and peak stage). Stability conditions and predicted mechanisms of failure are shown to be in reasonably good agreement with ?eld observations. Three riverbanks, representative of the main alluvial reaches of the river, were then selected for a more detailed bank stability analysis, consisting of: (a) de?nition of characteristic hydrographs of the reach with different return periods; (b) modelling of saturated and unsaturated ?ow using ?nite element seepage analysis; and (c) stability analysis with the limit equilibrium method, by adopting pore water pressure values derived from the seepage analysis. The results are compared to those obtained from the previous simpli?ed analysis, and are used to investigate the different responses, in terms of stability, to different hydrological and riverbank conditions. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献